Universal AC power adapter - wide-range, 40c - Requires separate country-specific power cord with C7 connector
Bail assembly - Mounting strip assembly for the starwheel mount assemblies (Not included) - Extends width of plotter (D-size)
Carriage belt (D-size) - Long/wide belt attached to the carriage
Carriage motor bracket
Pincharm spring retaining bushing
RS-232C serial cable - 25-pin (M) to 8-pin (M) DIN - 1.5m (4.9ft) long
RS-232C serial extension cable - 25-pin (M) to 25-pin (F) - 5.0m (16.4ft) long
RS-232C serial cable - 25-pin (M) to 25-pin (F) - 1.2m (3.9ft) long
Ribbon cable with ferrite - Has 5-pin (F) connectors - 16.5cm (6.5in) long
Spindle end cap - Small core spacer - Removes for loading the media roll. Please order spindle assembly.
Ribbon cable clamp (top half) - Secures the trailing cable to the top of the carriage assembly
Ribbon cable clamp (bottom half) - Secures the trailing cable to the top of the carriage assembly
Cross-brace - Brace that connects and supports the two stand legs
Cutter mechanism assembly - Auto cutter for rollfeed paper
Mrk encoder for HP BAIPLY1Z
Tubeaxial fan for HP DesignJet 750C Series
Code ROM SIMM (Firmware) (Ver. A.02.10) - Plugs into socket on the main logic board
Code ROM SIMM (Revision M.01.12 firmware) - Plugs into socket on the main logic board
Foot assembly (includes casters) - Mounts to the bottom of the plotter stand legs (two used)
Overdrive gear cluster
Clutch / overdrive gear assembly - Includes gear, clutch, retaining clip, and two washers
Cable holder (Small U-Shaped piece on top) - One of two pieces that hold the trailing cable to the main chassis
Housing assembly (on left side)
JetDirect CARD RJ45 10 BASE-T INTERNAL PRINT SERVER 10-100Base-TX or 10Base-2 Local Talk
Hardware kit for printer stand - Includes screwdriver, screws, washers, and media bin retaining clips
Leg assembly - Side support for the plotter - Does NOT include the foot assembly
SYNTHETIC OIL (4oz Plastic Bottle) Front and Rear Slider Rods Synthetic oil - One plastic bottle of 3.5oz / 118.29 ML
Maintenance kit - Includes service station (spittoon) assembly, carriage (Y-Axis) motor, encoder strip, and lubricating oil
4MB, 70nS, 36-bit parity SIMM memory module
4MB, 70nS, 36-bit SIMM memory module - For HP LaserJet 4P, 4+, 4V, 5, 5N, 5M, 5P, 5Si
8MB, 70nS, 36-bit parity SIMM memory module
8MB, 70nS, 36-bit SIMM memory module - For HP LaserJet 4P, 4+, 4V, 5, 5N, 5M, 5P, 5Si
16MB SIMM memory module
16MB, 70nS, 36-bit SIMM memory module
32MB, 70nS, 36-bit parity SIMM memory module
External JetDirect LAN interface module with EtherTwist (10Base-T) and ThinLAN (10Base-2) connectors
External token ring interface module - Has DB-9 connector
External JetDirect LAN interface module with RJ-45 connector for EtherTwist (10Base-T) or 100VG/802.12 input and three parallel (DB-25) output connectors
External JetDirect LAN interface module with EtherTwist (10Base-T) connector
Carriage drive motor assembly - Includes motor and cable
Paper (X-axis) drive motor (includes helical drive gear - NOTE: motor and gear are only sold as a set
Paper for DesignJet 1055 Series, DesignJet 800 Series, DesignJet 130 Series, DesignJet 500. Bond Paper - 24 inch x 150.
Main Logic Board - Includes Integrated RS232-C (Serial) and
Main Logic Pca Dj95xc 4m
External JetDirect 170X LAN interface module - Interfaces a parallel printer to an ethernet 10Base-T (RJ-45) LAN
JetDirect 400N modular input/output (MIO) internal print server - Provides 10/100Base-TX or 10Base-2 network connection using RJ45 or BNC connectors
JetDirect 400N modular input/output (MIO) - Internal print server - Provides 10/100Base-T or 10Base-2 network connection using RJ45 or BNC connectors
External JetDirect token ring interface module with DB-9 and RJ-45 input connectors and three parallel (DB-25) output connectors
HP JetDirect 500X external token ring print server module - Interfaces up to 3 parallel printers to an ethernet 10Base-T (RJ-45), 10Base2 (BNC), or 100Base-TX (RJ-45) LAN
HP Designjet 750C 755CM Postscript SIMM
PostScript SIMM
Power cord (Mint Gray) - 17 AWG, 2.3m (7.5ft) long - Has straight (F) receptacle (for 240V in the UK, Hong Kong, Singapore, Malaysia, and Brunei)
Power cord (Mint Gray) - 17 AWG, 2.0m (6.6ft) long - Has straight (F) receptacle (for 240V in Australia, New Zealand, and China)
Power cord (Mint Gray) - 17 AWG, 2.0m (6.6ft) long - Has straight (F) receptacle (for 220V in Europe, Bangladesh, Indonesia, Pakistan, Burma, Sri Lanka, and Vietnam)
Power cord (Mint Gray) - 2.0m (6.6ft) long - Has straight (F) receptacle (for 220V in Switzerland)
Daisy chain power cord (Dove Gray) - 18 AWG, 1.2m (4.0ft) long - Has C14 (M) plug for power input and C13 (F) plug for power output
Wall mount power supply module - 120VAC input 60Hz power supply AC DC 15W UNIVERSAL ADAPTER Power module (wall mount)- Input voltage 100-240 VAC - Output voltage 12 VDC, 15 watts output, 1.0A - for Jet Direct power and other accessories.
Power Supply PC Board
Primer assembly - Mounts under the service station assembly on the left side of the plotter
Paper drive (platen) roller assembly - Long gear driven roller - Includes roller and mark encoder
Media sensor mechanical assembly
Sensor assembly
SIMM module shield
Compression spring - Installed between pincharm assembly and bushing
Compression spring - For the pulley wedge - Applies tension to the carriage belt
Starwheel mount assembly - Includes cover, body, spring and two starwheels
Encoder strip assembly (D-size) - Includes encoder strip and encoder strip spring
Pulley wedge tensioner - For carriage (Y-axis) belt tension