Universal AC power adapter - wide-range, 40c - Requires separate country-specific power cord with C7 connector
Bail assembly - Includes bail, starwheels, and brackets
Carriage belt (D-size) - Long/wide belt attached to the carriage
Pincharm spring retaining bushing
RS-232C serial cable - 25-pin (M) to 8-pin (M) DIN - 1.5m (4.9ft) long
RS-232C serial extension cable - 25-pin (M) to 25-pin (F) - 5.0m (16.4ft) long
RS-232C serial cable - 25-pin (M) to 25-pin (F) - 1.2m (3.9ft) long
Ribbon cable - Has 5-pin (F) connectors - 16.3cm (6.4in) long
Carriage assembly trailing cable (D-size) - Has 60-pin (F) connectors - 1.6m (5.2ft) long
Rear cover - Has cutouts to access SIMM slot, interface connectors, and AC receptacle
Optional SIMM slot cover
Left end cover for HP DesignJet 250C D size
Right end cover - Has cut-outs to access control panel assembly
Primer assembly cover
Carriage top cover
Carriage ink cartridge slot cover
Cross-brace - Brace that connects and supports the two stand legs
Monochrome ROM SIMM (Rev A.01.06) - Plugs into main logic board slot
Foot assembly (includes casters) - Mounts to the bottom of the plotter stand legs (two used)
Handle - Right side of plotter - To load paper
Holder - For Quick Reference Guide - On right end cover
Keycap - For the power switch
Hardware kit for printer stand - Includes screwdriver, screws, washers, and media bin retaining clips
Leg assembly - Side support for the plotter - Does NOT include the foot assembly
2MB, 32-bit SIMM memory module
2MB, 70nS, 36-bit SIMM memory module - For HP LaserJet 4P, 4+, 4V, 5, 5N, 5M, 5P, 5Si
4MB, 70nS, 36-bit parity SIMM memory module
4MB, 70nS, 36-bit SIMM memory module - For HP LaserJet 4P, 4+, 4V, 5, 5N, 5M, 5P, 5Si
8MB, 70nS, 36-bit parity SIMM memory module
8MB, 70nS, 36-bit SIMM memory module - For HP LaserJet 4P, 4+, 4V, 5, 5N, 5M, 5P, 5Si
16MB SIMM memory module
Electronics Module - Contains Power Supply, Main Logic
Electronics module - Contains power supply, main logic board, interface connectors, and fan
External JetDirect LAN interface module with EtherTwist (10Base-T) and ThinLAN (10Base-2) connectors
External token ring interface module - Has DB-9 connector
External JetDirect LAN interface module with RJ-45 connector for EtherTwist (10Base-T) or 100VG/802.12 input and three parallel (DB-25) output connectors
External JetDirect LAN interface module with EtherTwist (10Base-T) connector
Carriage motor assembly
Paper (X-axis) drive motor (includes helical drive gear) - NOTE: motor and gear are only sold as an assembly
Nameplate - DesignJet 330 logo
Front panel overlay - Shows the function of the front panel buttons and indicator lights (English)
Repacking Kit - Materials to Repack Plotter
External JetDirect 170X LAN interface module - Interfaces a parallel printer to an ethernet 10Base-T (RJ-45) LAN
External JetDirect token ring interface module with DB-9 and RJ-45 input connectors and three parallel (DB-25) output connectors
HP JetDirect 500X external token ring print server module - Interfaces up to 3 parallel printers to an ethernet 10Base-T (RJ-45), 10Base2 (BNC), or 100Base-TX (RJ-45) LAN
Pincharm assembly - Curved black plastic plate with four small rubber rollers - Does NOT include spring or bushing
Power cord (Mint Gray) - 17 AWG, 2.3m (7.5ft) long - Has straight (F) receptacle (for 240V in the UK, Hong Kong, Singapore, Malaysia, and Brunei)
Power cord (Mint Gray) - 17 AWG, 2.0m (6.6ft) long - Has straight (F) receptacle (for 240V in Australia, New Zealand, and China)
Power cord (Mint Gray) - 17 AWG, 2.0m (6.6ft) long - Has straight (F) receptacle (for 220V in Europe, Bangladesh, Indonesia, Pakistan, Burma, Sri Lanka, and Vietnam)
Power cord (Mint Gray) - 2.0m (6.6ft) long - Has straight (F) receptacle (for 220V in Switzerland)
Daisy chain power cord (Dove Gray) - 18 AWG, 1.2m (4.0ft) long - Has C14 (M) plug for power input and C13 (F) plug for power output
Wall mount power supply module - 120VAC input 60Hz power supply AC DC 15W UNIVERSAL ADAPTER Power module (wall mount)- Input voltage 100-240 VAC - Output voltage 12 VDC, 15 watts output, 1.0A - for Jet Direct power and other accessories.
Primer assembly - Mounted on left side of plotter
Paper drive (platen) roller assembly - Long gear driven roller - Includes roller and mark encoder
Rollfeed assembly - Enables plotter to use rollfeed paper
Media sensor mechanical assembly
Rollfeed spindle assembly (D-size) - Includes end caps
Compression spring - Installed between pincharm assembly and bushing
DesignJet 230/250C Optional Stand (D/A1) - Includes legs, casters and brace - Does NOT include the paper bin
Encoder strip assembly (D-size) - Includes encoder strip and encoder strip spring
Control panel assembly - Mounts in right side cover - Includes control panel, panel support, and cover sensor
Rollfeed upgrade kit (24-inch) - Includes rollfeed module and stand assembly - Does not include media diverter