Carriage belt - Drives the carriage assembly - For use with 24-inch plotters
Ribbon cable kit - Includes installation instructions and ribbon cable with ferrite - Cable has 40 pin (F) connectors - 1.6m (5.1ft) long.
Hewlett Packard (HP)Hub spindle black svc cap. Cap supports roll paper spindle takes one on each side. Part number is for one pc.
Printhead carriage assembly - Includes carriage, bushings, pen latches, carriage position sensor, and line sensor
Top cover assembly (Gray) - For the 24-inch DesignJet 500 printer series
Cross-brace - Brace that connects and supports the two stand legs - For 24-inch plotters
Vacuum fan assembly (OEM LIMITED SUPPLY).
Media deflector holders - For the DesignJet 500/800 printer series
Leg assembly, only one included, not both as shown - Side support for the printer - Does NOT include the foot assembly
Pincharm lift mechanism - Includes cam (a long bar) , cam bushings, pinch arm lever, pinch arm lever bushing
128MB SO-DIMM memory module HP DesignJet 500 500PS 800 800PS Memory. Also for other HP models.
Paper axis motor assembly - Includes cablesPaper axis motor assembly - Includes cables
HP Universal Semi-gloss Photo Paper - 91.4cm (36in) x 30.5m (100ft) roll
Formatter PC board FORMATTER POWER HPGL2 SV - RC EIO WITH PC BOARD HP-GL/2 formatter PC board (Includes C7779-60270 128MB SDRAM 100MHz CL2 and firmware) formatter fits for HP Designjet Plotters fix error: 05:10
Formatter upgrade kit - Adds HP-GL/2 DesignJet 500 800 series GL/2 Card C7772A - Plugs into an EIO card slot. GL-2 AND RTL FORMATTER HP-GL/2 and RTL formatter PC board
formatter PC board EIO FORMATTER POWER HPGL2 SV - RC EIO WITH PC BOARD HP-GL/2 formatter PC board (Includes C7779-60270 128MB SDRAM 100MHz CL2)
FORMATTER POWER HPGL2 SV - RC EIO WITH PC BOARD HP-GL/2 formatter PC board (Includes C7779-60270 128MB SDRAM 100MHz CL2) formatter fits for HP Designjet Plotters fix error: 05:10
FORMATTER POWER HPGL2 SV - RC EIO WITH PC BOARD HP-GL/2 formatter PC board (Includes C7779-60270 128MB SDRAM 100MHz CL2 and firmware) formatter fits for HP Designjet Plotters fix error: 05:10
HP JetDirect 620n internal print server - 10BaseT and 100BaseTX LAN interface board - Plugs into peripheral EIO slot - Has an RJ-45 connector - Comes with software on CD-ROM and manual on CD-ROM
HP JetDirect en3700 external print server - Fast Ethernet Internet connector for sharing peripherals with USB ports, in a 10/100 TX LAN environment - Has one USB 2.0 printer port and one RJ-45 10/100 Base-TX connector - Includes software and power module
HP Jetdirect ew2400 802.11g wireless print server module - Includes power supply, USB cable, LAN/Ethernet cable, setup documentation and software
Front platen kit - Includes platens for both the 24-inch and the 42-inch models
Back platen assembly - Curved cover/guide that is installed below the paper drive roller - For use with 24-inch plotters
Power supply assembly for designJet - Includes power switch. (pwr supply for copier module is Q1278-60072)
Setup printhead kit - Used to prime the ink tubes - Includes 4 setup printheads. Used to remove air and prime the ink system
Paper drive roller kit - Includes roller assembly, bushings, gear on roller, transmission gear kit, encoder disc, end thrust (axial) spring, lint free cloth, rubber glove, and instruction sheets - For use with 24-inch plotters
Drive roller encoder sensor
Service station - Includes wipers, pen caps, and the right hand spittoon - Installed in right side of printer
Hewlett Packard (HP)Hub spindle blue svc cap. Cap supports roll paper, spindle takes one on each side. Part number is for one pc.
Left spittoon assembly - Contains absorbers which hold excess ink from printheads
Trim kit - Includes the front and back trims for the left and right sides - Installed between the main printer chassis and the left or right end covers