Carriage Belt - Drives the carriage assembly - For use with 42-inch plotters
Ribbon cable kit - Includes installation instructions and ribbon cable with ferrite - Cable has 40 pin (F) connectors - 1.6m (5.1ft) long.
Carriage assembly trailing cable kit - CABLE ONLY - NO LONGER INCLUDES installation instructions trailing cables mounting clips and a ferrite - Cables have 30-pin (M) edge connectors - 2.0m (6.5ft) long - For 42-inch models
Hewlett Packard (HP)Hub spindle black svc cap. Cap supports roll paper spindle takes one on each side. Part number is for one pc.
Printhead carriage assembly - Includes carriage, bushings, pen latches, carriage position sensor, and line sensor
Control panel assembly - Includes ribbon cable and english overlay marked with Menu Back Enter Cancel and Form feed and cut
Control panel assembly - Includes ribbon cable and english overlay marked with Menu, Back, Enter, Cancel, and Form feed and cut
Left end cover and EIO cover (Gray) COVER WHITE (SVC) - Right cover Left end cover and EIO cover - White or Gray plastic cover on left side
Vacuum fan assembly (OEM LIMITED SUPPLY).
Cutter guide - Guide bar for the cutter assembly - For 42-inch plotters
Media deflector holders - For the DesignJet 500/800 printer series
Leg assembly, only one included, not both as shown - Side support for the printer - Does NOT include the foot assembly
Pincharm lift mechanism - Includes cam (a long bar) , cam bushings, pinch arm lever, pinch arm lever bushing
Paper axis motor assembly - Includes cablesPaper axis motor assembly - Includes cables
HP Universal Semi-gloss Photo Paper - 91.4cm (36in) x 30.5m (100ft) roll
Formatter PC board FORMATTER POWER HPGL2 SV - RC EIO WITH PC BOARD HP-GL/2 formatter PC board (Includes C7779-60270 128MB SDRAM 100MHz CL2 and firmware) formatter fits for HP Designjet Plotters fix error: 05:10
Formatter upgrade kit - Adds HP-GL/2 DesignJet 500 800 series GL/2 Card C7772A - Plugs into an EIO card slot. GL-2 AND RTL FORMATTER HP-GL/2 and RTL formatter PC board
FORMATTER POWER HPGL2 SV - RC EIO WITH PC BOARD HP-GL/2 formatter PC board (Includes C7779-60270 128MB SDRAM 100MHz CL2)
FORMATTER POWER HPGL2 SV - RC EIO WITH PC BOARD HP-GL/2 formatter PC board (Includes C7779-60270 128MB SDRAM 100MHz CL2 and firmware) formatter fits for HP Designjet Plotters fix error: 05:10
HP JetDirect 620n internal print server - 10BaseT and 100BaseTX LAN interface board - Plugs into peripheral EIO slot - Has an RJ-45 connector - Comes with software on CD-ROM and manual on CD-ROM
HP JetDirect en3700 external print server - Fast Ethernet Internet connector for sharing peripherals with USB ports, in a 10/100 TX LAN environment - Has one USB 2.0 printer port and one RJ-45 10/100 Base-TX connector - Includes software and power module
HP Jetdirect ew2400 802.11g wireless print server module - Includes power supply, USB cable, LAN/Ethernet cable, setup documentation and software
Front platen kit - Includes platens for both the 24-inch and the 42-inch models
BACK PLATEN 42 inch (SVC) - RCBack platen assembly - Curved cover/guide that is installed below the paper drive roller - For use with 42-inch plotters
Setup printhead kit - Used to prime the ink tubes - Includes 4 setup printheads. Used to remove air and prime the ink system
Drive roller encoder sensor
Service station - Includes wipers, pen caps, and the right hand spittoon - Installed in right side of printer
Ink tubes assembly - Includes four ink tubes, complete with hardware assemblies at both ends (carriage crane and ink supply station crane), and four setup pens - For use with the 42-inch Designjet 500/800 printer series
Hewlett Packard (HP)Hub spindle blue svc cap. Cap supports roll paper, spindle takes one on each side. Part number is for one pc.
Left spittoon assembly - Contains absorbers which hold excess ink from printheads
Encoder strip - For use with 42-inch plotters
Trim kit - Includes the front and back trims for the left and right sides - Installed between the main printer chassis and the left or right end covers