JetDirect 620n internal print server - 10BaseT and 100BaseTX LAN interface board - Plugs into peripheral EIO slot - Has an RJ-45 connector;Click to order the functional equivalent: J7934-69021
Carriage Belt - Drives the carriage assembly - For use with 42-inch plotters
Ribbon cable kit - Includes installation instructions and ribbon cable with ferrite - Cable has 40 pin (F) connectors - 1.6m (5.1ft) long.
Carriage assembly trailing cable kit - CABLE ONLY - NO LONGER INCLUDES installation instructions trailing cables mounting clips and a ferrite - Cables have 30-pin (M) edge connectors - 2.0m (6.5ft) long - For 42-inch models
Hewlett Packard (HP)Hub spindle black svc cap. Cap supports roll paper spindle takes one on each side. Part number is for one pc.
Printhead carriage assembly - Includes carriage, bushings, pen latches, carriage position sensor, and line sensor
Control panel assembly - Includes ribbon cable and english overlay marked with Menu Back Enter Cancel and Form feed and cut
Control panel assembly - Includes ribbon cable and english overlay marked with Menu, Back, Enter, Cancel, and Form feed and cut
Top cover assembly (Gray) - For the 24-inch DesignJet 500 printer series
Cover kit for drive roller encoder sensor
Cross-brace - Brace that connects and supports the two stand legs - For 24-inch plotters
Vacuum fan assembly (OEM LIMITED SUPPLY).
High gloss white film (4 mil) - 91.4cm (36in) x 30.5m (100ft) roll
Media deflector holders - For the DesignJet 500/800 printer series
Ink tubes assembly - Includes four ink tubes, complete with hardware assemblies at both ends (carriage crane and ink supply station crane), and four setup pens - For use with the 42-inch Designjet 500/800 printer series
Leg assembly, only one included, not both as shown - Side support for the printer - Does NOT include the foot assembly
Pincharm lift mechanism - Includes cam (a long bar) , cam bushings, pinch arm lever, pinch arm lever bushing
128MB SO-DIMM memory module HP DesignJet 500 500PS 800 800PS Memory. Also for other HP models.
Carriage (scan-axis) motor assembly - Includes cable
Paper axis motor assembly - Includes cablesPaper axis motor assembly - Includes cables
Paper for DesignJet 1055 Series, DesignJet 800 Series, DesignJet 130 Series, DesignJet 500. Bond Paper - 24 inch x 150.
HP Universal Semi-gloss Photo Paper - 91.4cm (36in) x 30.5m (100ft) roll
HP universal high-gloss photo paper - 107cm (42in) x 30.5m (100ft) roll
Interconnect PC board Interconnect PC board - Installed in right-side of printer
Formatter upgrade kit - Adds HP-GL/2 DesignJet 500 800 series GL/2 Card C7772A - Plugs into an EIO card slot. GL-2 AND RTL FORMATTER HP-GL/2 and RTL formatter PC board
Formatter PC board FORMATTER POWER HPGL2 SV - RC EIO WITH PC BOARD HP-GL/2 formatter PC board (Includes C7779-60270 128MB SDRAM 100MHz CL2 and firmware) formatter fits for HP Designjet Plotters fix error: 05:10
Formatter PC board FORMATTER POWER HPGL2 SV - RC EIO WITH PC BOARD HP-GL/2 formatter PC board (Includes C7779-60270 128MB SDRAM 100MHz CL2)
FORMATTER POWER HPGL2 SV - RC EIO WITH PC BOARD HP-GL/2 formatter PC board (Includes C7779-60270 128MB SDRAM 100MHz CL2)
Formatter PC board FORMATTER POWER HPGL2 SV - RC EIO WITH PC BOARD HP-GL/2 formatter PC board (Includes C7779-60270 128MB SDRAM 100MHz CL2 and firmware)
formatter PC board EIO FORMATTER POWER HPGL2 SV - RC EIO WITH PC BOARD HP-GL/2 formatter PC board (Includes C7779-60270 128MB SDRAM 100MHz CL2)
FORMATTER POWER HPGL2 SV - RC EIO WITH PC BOARD HP-GL/2 formatter PC board (Includes C7779-60270 128MB SDRAM 100MHz CL2) formatter fits for HP Designjet Plotters fix error: 05:10
FORMATTER POWER HPGL2 SV - RC EIO WITH PC BOARD HP-GL/2 formatter PC board (Includes C7779-60270 128MB SDRAM 100MHz CL2 and firmware) formatter fits for HP Designjet Plotters fix error: 05:10
JetDirect 600N EIO internal print server token ring LAN interface board - Has one RJ-45 and DB-9 connector
Ethernet 10Base-T (RJ-45) EIO network HP JETDIRECT 600N internal print server PC board
Ethernet 10Base-T/10Base2 and LocalTalk (RJ-45, BNC, LocalTalk) EIO network PCA
JetDirect 600N internal print server (10Base-T and 100Base-TX) LAN interface board - Plugs into peripheral EIO slot
HP JetDirect 500X external token ring print server module - Interfaces up to 3 parallel printers to an ethernet 10Base-T (RJ-45), 10Base2 (BNC), or 100Base-TX (RJ-45) LAN
JetDirect 610N internal print server (10Base-T and 100Base-TX) LAN interface board - Plugs into peripheral EIO slot - Has a RJ-45 connector - Comes with software on CD-ROM and manual
HP JetDirect 620n internal print server - 10BaseT and 100BaseTX LAN interface board - Plugs into peripheral EIO slot - Has an RJ-45 connector - Comes with software on CD-ROM and manual on CD-ROM
HP JetDirect en3700 external print server - Fast Ethernet Internet connector for sharing peripherals with USB ports, in a 10/100 TX LAN environment - Has one USB 2.0 printer port and one RJ-45 10/100 Base-TX connector - Includes software and power module
HP Jetdirect ew2400 802.11g wireless print server module - Includes power supply, USB cable, LAN/Ethernet cable, setup documentation and software
Back platen assembly - Curved cover/guide that is installed below the paper drive roller - For use with 24-inch plotters
Front platen kit - Includes platens for both the 24-inch and the 42-inch models
BACK PLATEN 42 inch (SVC) - RCBack platen assembly - Curved cover/guide that is installed below the paper drive roller - For use with 42-inch plotters
Power cord (Mint Gray) - 17 AWG, 2.3m (7.5ft) long - Has straight (F) receptacle (for 240V in the UK, Hong Kong, Singapore, Malaysia, and Brunei)
Power cord (Mint Gray) - 17 AWG, 2.0m (6.6ft) long - Has straight (F) receptacle (for 240V in Australia, New Zealand, and China)
Power cord (Mint Gray) - 17 AWG, 2.0m (6.6ft) long - Has straight (F) receptacle (for 220V in Europe, Bangladesh, Indonesia, Pakistan, Burma, Sri Lanka, and Vietnam)
Power cord (Mint Gray) - 2.0m (6.6ft) long - Has straight (F) receptacle (for 220V in Switzerland)
Power supply assembly for designJet - Includes power switch. (pwr supply for copier module is Q1278-60072)
Power supply assembly - Includes power switch
JetDirect 600N EIO internal print server 10Base-T, 10BASE-2, and LocalTalk LAN interface board - Has one RJ-45, BNC, and 8-pin DIN connector
JetDirect 620N Ethernet Print Server, internal print server LAN interface board - 10Base-T and 100Base-TX - Plugs into peripheral EIO slot, has RJ-45 connector.
Setup printhead kit - Used to prime the ink tubes - Includes 4 setup printheads. Used to remove air and prime the ink system
Paper drive roller kit - Includes roller assembly, bushings, gear on roller, transmission gear kit, encoder disc, end thrust (axial) spring, lint free cloth, rubber glove, and instruction sheets - For use with 24-inch plotters
Drive roller encoder sensor
Service station - Service St SV - RCService station - Includes wipers, pen caps, and the right hand spittoon - Installed in right side of printer
Service station - Includes wipers, pen caps, and the right hand spittoon - Installed in right side of printer
Left spittoon assembly - Contains absorbers which hold excess ink from printheads
Encoder strip - For use with 42-inch plotters
Trim kit - Includes the front and back trims for the left and right sides - Installed between the main printer chassis and the left or right end covers