Arm - Triangle shaped arm on upper inside front of printer
Data cable for hard disk drive (2-wire)
40GB SATA Hard drive - 5,400 RPM, 2.5 inch form factor, 9.5mm height Hard drive kit. For PATA (Parallel ATA) connector order Q7829-67935.
Cooling fan - Located on left side of printer (FN101)
Fax printed circuit assembly (PCA) - Accessed from the rear of the unit - Located on the formatter boardHP LaserJet analog fax accessory 300
Paper feed assembly - Includes tray 1 paper feed sensor flag, torsion spring, and paper feed roller assembly
Paper feed assembly - Includes torsion spring and paper feed roller assembly
Reversing separation guide assembly
Hard drive - For digital sending, copy, and storage
Swing plate assembly - Pressure Roller GearSwing plate assembly - For tray 2 paper lift assembly Located between the main gear assembly and the fuser, just above the power supply. swing plate assembly usually comes with black and white large gears.
128MB, 100-pin, DDR DIMM - Used to add flash memory-based accessory fonts, macros, and patterns
Main motor - M101 FOR HEWLETT PACKARD LaserJet MODELS.
Control panel assembly - Control buttons and display located on top of the printer - Does not include overlay
ADF paper seperation pad assembly - Mounts in the center of the ADF separation pad frame assembly at the rear part of the paper input tray
Formatter PCA assembly - For LaserJet M4345MFP
Formatter PC board assembly - For LaserJet M4345MFP
Driver PCA - 500 sheet feeder driver PCA
Power cord (Black) - 2.0m (6.6ft) long - Has straight (F) C13 receptacle (For 240V in India)
Link rod - Connects to the toner cartridge drive gear mechanism
Tray 1 pickup roller - D-shaped roller located under the envelope cover
Paper pickup roller - Gray spongy rubber roller on a white cylinder and 24-tooth white gear on one side
Paper feed/seperation roller assembly - Black rubber roller on a blue plastic cylinder
Paper Feed Roller Assy
Paper Pick Up Roller
Scanner assembly - Complete flatbed scanner assembly
Tray 2 pick-up solenoid - Mounts on the paper pick-up drive assembly
Cover spring - Provides tension for left side plastic cover of ADF assembly - Two used
500 sheet/stapler stacker for Hewlett Packard Multifunction products.
Bushing stop - For the fuser lever - Located on the inside upper front part of the printer - Two used