Shutter arm for HP LaserJet M9040 MFP
Control panel assembly - Control buttons and display located on top front of printer
Lower left cover - Smaller plastic piece below left door and diverter assembly
Right front inside corner cover
Left upper cover assembly - Small rectangular cover that mounts between the top of the printer and the paper output tray
Front inside cover - Cover behind front drop down cover
40GB SATA Hard drive - 5,400 RPM, 2.5 inch form factor, 9.5mm height Hard drive kit. For PATA (Parallel ATA) connector order Q7829-67935.
Tubeaxial fan (#5) - Provides air to the cartridge area
Fax printed circuit assembly (PCA) - Accessed from the rear of the unit - Located on the formatter boardHP LaserJet analog fax accessory 300
Paper input whole unit assembly - For printer/engine. PIU Paper Input Unit for LaserJet 9000 / 9000MFP / M9040 / M9050 / 9040 MFP / 9050 MFP and compatible units.
Sensor flag - Short rod with two flat flags and a curved end flag
Chassis foot - Support for right side of printer chassis - Two used
Fuser Assembly - For 100 VAC to 127 VAC - Bonds toner to paper with heat
Paper pickup guide - Plastic shaft with several fins on it - Mounts on the upper right side of the print engine frame assembly
Cartridge guide - Plastic structure with cartridge guide slot molded into it - Mounts on the upper front side of the registration assembly
Front cover hinge
Jam removal knob
Sensor lever - Rotating arm with a flag at one end that protrudes through the ADF base and another at the other end that activates one of the media length sensors - Mounts on the bottom center of the ADF base assembly (two used)
128MB, 100-pin, DDR DIMM memory module
128MB, 100-pin, DDR DIMM - Used to add flash memory-based accessory fonts, macros, and patterns
Front pressure mount for toner cartridge
Rear pressure mount for toner cartridge
Flatbed scanner optical assembly - Includes the support structure, lamp assembly, charge-coupled devices (CCD) and lens assembly, flatbed analog board, drive belt, and cables - Scans and digitizes documents placed on the flatbed scanner
Copy processor board assembly - Includes the PC board and support carrier frame - Plugs in one of the EIO slots on Multi Function Printer/copier MFP the printer.
Assy-DC Controler PCB ver R1.02 Rohs2.04
Scanner control PC board - Controls the scanner and ADF functions - Connects to all the drive motors in both units and all the sensors in the scanner - Mounts in rear of the scanner towards the left rear
Paper pickup assembly - Includes the pickup structure pieces, motors, gears, belts, rollers and sloenoid (Does NOT include the ADF main assembly) - Mounts on top of the ADF base assembly towards the left end
Scanner power supply assembly - Includes the power supply electronics, fan, and support bracket - Provides power for the ADF and scanner assemblies - Mounts on the rear of the scanner assembly
High voltage power supply board - Mounts on the upper rear of the printer
Power supply assembly
Front Fusing Rail
Rear Fusing Rail
Cartridge guide rail - Right side toner cartridge guide rail
Registration roller assembly
Transfer roller only - Includes the long black spongy roller roller shaft and drive gear - Transfers static charge to the paper
Feed separation pick-up roller - Rubber roller on a plastic collar with integrated gear and locking tab
Paper pick-up and feed roller assembly - Rubber roller with drive gear
Pick-up roller for optional tray 1
Separation roller - For tray 1 assembly
Copy connect cable-scanner 16 in
Laser shutter - Cartridge shutter actuator - Piece that opens cartridge shutter as it is inserted into the printer
Left hard disk rail snap;Click to order the functional equivalent: CC519-67904
Rail, right snap HP Hard Drive Caddy Rail
Torsion spring - Provides tension for bin full flag
Shutter arm spring - Provides tension for shutter arm
Compression spring - Provides tension for ON/OFF switch
Transfer roller assembly w/holder - Includes transfer guides holder chrome plate and transfer roller unit.