Universal AC power adapter - wide-range, 40c - Requires separate country-specific power cord with C7 connector
JetDirect 620n internal print server - 10BaseT and 100BaseTX LAN interface board - Plugs into peripheral EIO slot - Has an RJ-45 connector;Click to order the functional equivalent: J7934-69021
Bail assembly (D-size) - Has star wheel assemblies attached
Carriage belt (D-size) - Long/wide belt attached to the carriage
Carriage belt - Drives the carriage assembly - For use with 24-inch plotters
Belt assembly - Includes belt tensioner - For 44-inch plotters
Foot Svs Black 2 pcs Foot Assembly SV Foot assembly (Black) - Includes two feet
T series and Z series HP Designjet Plotters. New Foot Assembly SV Foot assembly (Black) - Includes two feet
Foot assembly - Includes one foot and one support tube.
one Carriage rear bushing (one sold) Carriage Rear Bushing For HP T610 T620 Z2100 Z3100 T1100 T770 T790 and compatible models.
Carriage assembly trailing cable (D-size) - Has 60-pin (F) connectors - 1.6m (5.2ft) long
T1120/620 Cables Harness SV Left and right side harness cables - For Designjet printers
T1120/620 Cables SV Kit
Bail lift cam - Mounted behind the bail engaging lever support
Carriage with cutter Assembly - For the Designjet T770/T790/T1200/T1300/T2300 printer series
Overdrive clutch assembly - Small, wide gear near overdrive gear - Held in place with a retaining E-ring
Carriage top cover
Carriage ink cartridge slot cover
Top cover assembly (Gray) - For the 24-inch DesignJet 500 printer series
Lower roll cover assembly - With pinches - For DesignJet printers
Upper roll cover assembly - Includes pinches - For Designjet printers
Back cover - For the Designjet T1200/T770 printer series
Lower Roll Cover assy without ARSS S
Cross-brace - Brace that connects and supports the two stand legs - For 24-inch plotters
Cutter assembly - Mounts on carriage slide rod to the right of the carriage
Media deflector with media button - The media deflector furthest to the right side - Includes media load button
Z2100-revD HDD w-FW
Engine Cables 44in SV
Vacuum fan assembly (OEM LIMITED SUPPLY).
Front panel assembly - Complete
Bail engaging lever gear
Rollfeed guide kit - Left and right guides mounted under printer - Used to attach rollfeed housings to the printer
Right Roll Guide SVC
T1200/T770 SATA HDD w/FW SV SATA Hard Disk Drive (HDD) - Includes firmware - For use with DesignJet printers
SATA Hard Drive T1200/T770/T770-24 SATA HDD w/FW SV SATA Hard Disk Drive (HDD) - Includes firmware - For use with DesignJet printers
Holder - For Quick Reference Guide - On right end cover
Media deflector holders - For the DesignJet 500/800 printer series
HP Spindle Hub Cap color Black for Designjet T610 T770 T790 T1100 T1120 T1200 Z2100 Z3100 Z5200
Left ink supply station - For the DesignJet T1100/T610 printer series
Ink supply tubes - Includes trailing cable - For use with Designjet printers Ink supply tubes - Includes trailing cable - For use with Designjet printers. (Please order kit CR649-67003).
Ink system purgers -for Hewlett Packard plotter units, ink system purge, - includes six units.
Ink system purgers - Includes 100 units
Hardware kit for printer stand - Includes screwdriver, screws, washers, and media bin retaining clips
Cable kit - For the Designjet T series printers
Hardware Kit for Designjet Z2100 Series, Designjet T770 Series, Designjet Z3100 Series, DesignJet T1100 T160 printer series
Leg assembly, only one included, not both as shown - Side support for the printer - Does NOT include the foot assembly
Starwheel lifter assembly - For the DesignJet T1100/T610 printer series
SYNTHETIC OIL (4oz Plastic Bottle) Front and Rear Slider Rods Synthetic oil - One plastic bottle of 3.5oz / 118.29 ML
Preventive maintenance kit 1 - Includes the carriage with cutter assembly scan-axis motor tube system with trailing cable and belt - For the 44-inch Designjet T Series printers.
Preventive maintenance kit 2 service station - Includes the drop detector and the service station spittoon - For the Designjet T1200 T770 T790 T795 T1300 and T2300 printer series
Media bin (Black) - Includes bin and support - Mounts to the printer stand legs
4MB, 70nS DRAM SIMM memory module
64MB SO-DIMM memory 133mhz cl3 module HP DesignJet 500 / 800 144pin PC100 Memory Module installs into the formatter EIO board.
32MB, 70nS, 36-bit parity SIMM memory module
Electronics module - Contains power supply, Main Logic board, interface connectors, and fan
Paper axis motor assembly - Includes cablesPaper axis motor assembly - Includes cables
T1200/T770 Media Advance Trans Media advance transmission - For DesignJet printers
Scan Axis Motor Poly-V, SCAN AXIS MOTOR - HP T1200 T1300 T2300 T770 T790
Starwheel motor assembly - For the DesignJet printers T series and Z series.
Repacking Kit - Materials to Repack Plotter
HP Universal Semi-gloss Photo Paper - 91.4cm (36in) x 30.5m (100ft) roll
T1200/T770 Formatter board - Does NOT include the Hard Disk Drive (HDD) - For the 44inch Designjet printer series
T1200/T770 Formatter board - Does NOT include the Hard Disk Drive (HDD) - For the Designjet printer series
T1200/T770 Main PCA with Power Supply Unit PSU SV Main PCA - Includes Power Supply Unit (PSU).
T120 Mpca Assy
MSG signed analog encoder PC board (for calibration and alignment line sensor order Q6683-67004)
JetDirect 600N EIO internal print server token ring LAN interface board - Has one RJ-45 and DB-9 connector
External JetDirect token ring interface module with DB-9 and RJ-45 input connectors and three parallel (DB-25) output connectors
Back platen assembly - Curved cover/guide that is installed below the paper drive roller - For use with 24-inch plotters
Front platen kit - Includes platens for both the 24-inch and the 42-inch models
Power Supply Unit 110v (PSU) - For the DesignJet T1200/T770 printer series
Power Supply Unit (PSU) - For the Designjet T1200/T770 printer seriesPower Supply Unit 110V (PSU) - For the Designjet T1200/T770 printer series
Primer assembly - Mounted on left side of plotter
Setup printhead kit - Used to prime the ink tubes - Includes 4 setup printheads. Used to remove air and prime the ink system
72 Matte Black and Yellow Printhead
Paper drive (platen) roller assembly - Long gear driven roller - Includes roller and mark encoder
Overdrive roller assembly (D-size) - Includes overdrive shaft with rollers, overdrive housing, media deflector without media button, and media deflector with media button
Paper drive roller kit - Includes roller assembly, bushings, gear on roller, transmission gear kit, encoder disc, end thrust (axial) spring, lint free cloth, rubber glove, and instruction sheets - For use with 24-inch plotters
Drive roller encoder sensor
Single sheet sensor - For the Designjet T series printers
Line sensor service
Out of paper sensor (OOPS - paper sensor.(for media sensor unit order CN727-69003).
3pk,T1200/T770 Service Station SV
Service station - Includes wipers, pen caps, and the right hand spittoon - Installed in right side of printer
Preventive Maintenance Kit #2. Service station - Includes the drop detector and the service station spittoon - For the Designjet T1200 T770 T790 T795 T1300 and T2300 printer series
Spittoon assembly - Contains absorbers which hold excess ink from cartridges
Left spittoon assembly - Contains absorbers which hold excess ink from printheads
Left-side spittoon assembly - Holds expelled ink from cartridge during refresh cycle
Bail gear support 'claw' spring - Attached between the bail engaging lever support and the bail gear assembly
Starwheel mount assembly - Includes cover, body, spring and two starwheels
Starwheel assembly - For 44-inch plotters
Encoder strip assembly (D-size) - Includes encoder strip and encoder strip spring
Lower right side support - For the Designjet T1200 printer series
Media driver tool kit - Includes the handle for media driver tool support and the media driver ddjustment tool
Tool Kit - Includes the flex cleaner, screwdriver torx T-15, dispenser oil, insert spring tool, alignment manual pinch arm, and media driver tool - For use with the DesignJet Z and T printer series
Trim kit - Includes the front and back trims for the left and right sides - Installed between the main printer chassis and the left or right end covers