Universal AC power adapter - wide-range, 40c - Requires separate country-specific power cord with C7 connector
JetDirect 620n internal print server - 10BaseT and 100BaseTX LAN interface board - Plugs into peripheral EIO slot - Has an RJ-45 connector;Click to order the functional equivalent: J7934-69021
Bail assembly (D-size) - Has star wheel assemblies attached
Carriage belt (D-size) - Long/wide belt attached to the carriage
Carriage belt - Drives the carriage assembly - For use with 24-inch plotters
Foot Svs Black 2 pcs Foot Assembly SV Foot assembly (Black) - Includes two feet
T series and Z series HP Designjet Plotters. New Foot Assembly SV Foot assembly (Black) - Includes two feet
Foot assembly - Includes one foot and one support tube.
one Carriage rear bushing (one sold) Carriage Rear Bushing For HP T610 T620 Z2100 Z3100 T1100 T770 T790 and compatible models.
Carriage assembly trailing cable (D-size) - Has 60-pin (F) connectors - 1.6m (5.2ft) long
T1120/620 Cables Harness SV Left and right side harness cables - For Designjet printers
T1120/620 Cables SV Kit
Bail lift cam - Mounted behind the bail engaging lever support
Overdrive clutch assembly - Small, wide gear near overdrive gear - Held in place with a retaining E-ring
Carriage top cover
Carriage ink cartridge slot cover
Top cover assembly (Gray) - For the 24-inch DesignJet 500 printer series
Cross-brace - Brace that connects and supports the two stand legs - For 24-inch plotters
Cutter assembly - Mounts on carriage slide rod to the right of the carriage
Cutter assembly - Auto cutter assembly for rollfeed paper individual cutter (Does not include blue handle.)
Media deflector with media button - The media deflector furthest to the right side - Includes media load button
Vacuum fan assembly (OEM LIMITED SUPPLY).
Foot assembly - Includes one foot and one support tube;The following part(s) are related to part Q5669-60715. May we suggest CH539-69001
Front panel assembly - Complete
Bail engaging lever gear
Rollfeed guide kit - Left and right guides mounted under printer - Used to attach rollfeed housings to the printer
Right Roll Guide SVC
Holder - For Quick Reference Guide - On right end cover
Media deflector holders - For the DesignJet 500/800 printer series
HP Designjet black spindle hub cap for spindle unit; models T120 T520 T770 T790 T610 T620 T1100 Z6100
Left ink supply station - For the DesignJet T1100/T610 printer series
Ink Supply Tubes with Hitachi TC 24inch plotter.
Ink system purgers -for Hewlett Packard plotter units, ink system purge, - includes six units.
Ink system purgers - Includes 100 units
Hardware kit for printer stand - Includes screwdriver, screws, washers, and media bin retaining clips
Hardware Kit for Designjet Z2100 Series, Designjet T770 Series, Designjet Z3100 Series, DesignJet T1100 T160 printer series
Leg assembly, only one included, not both as shown - Side support for the printer - Does NOT include the foot assembly
Starwheel lifter assembly - For the DesignJet T1100/T610 printer series
SYNTHETIC OIL (4oz Plastic Bottle) Front and Rear Slider Rods Synthetic oil - One plastic bottle of 3.5oz / 118.29 ML
4MB, 70nS DRAM SIMM memory module
64MB SO-DIMM memory 133mhz cl3 module HP DesignJet 500 / 800 144pin PC100 Memory Module installs into the formatter EIO board.
Paper axis motor assembly - Includes cablesPaper axis motor assembly - Includes cables
T1200/T770 Media Advance Trans Media advance transmission - For DesignJet printers
Starwheel motor assembly - For the DesignJet printers T series and Z series.
Repacking Kit - Materials to Repack Plotter
HP Universal Semi-gloss Photo Paper - 91.4cm (36in) x 30.5m (100ft) roll
Media advance transmission - For the DesignJet T1120SD/T1120/620 printer series
Main PCA - Controls and drives the printer - For the 24-inch DesignJet T1120SD/T1120/T620 printer series
Formatter board assembly - Does not include hard disk drive (CK837-67035)- For the DesignJet Z5200/T1120/T1120ps/T620 printer series
MSG signed analog encoder PC board (for calibration and alignment line sensor order Q6683-67004)
JetDirect 600N EIO internal print server token ring LAN interface board - Has one RJ-45 and DB-9 connector
External JetDirect token ring interface module with DB-9 and RJ-45 input connectors and three parallel (DB-25) output connectors
Front platen kit - Includes platens for both the 24-inch and the 42-inch models
Back platen assembly - Curved cover/guide that is installed below the paper drive roller - For use with 24-inch plotters
Power supply unit (PSU) assembly - For DesignJet printersPower supply unit (PSU) assembly - For DesignJet printers
Z3200 RevB Bender PSU SV
Primer assembly - Mounted on left side of plotter
Setup printhead kit - Used to prime the ink tubes - Includes 4 setup printheads. Used to remove air and prime the ink system
72 Matte Black and Yellow Printhead
Paper drive (platen) roller assembly - Long gear driven roller - Includes roller and mark encoder
Overdrive roller assembly (D-size) - Includes overdrive shaft with rollers, overdrive housing, media deflector without media button, and media deflector with media button
Paper drive roller kit - Includes roller assembly, bushings, gear on roller, transmission gear kit, encoder disc, end thrust (axial) spring, lint free cloth, rubber glove, and instruction sheets - For use with 24-inch plotters
Drive roller encoder sensor
Line sensor service
Out of paper sensor (OOPS - paper sensor.(for media sensor unit order CN727-69003).
Service station - Includes wipers, pen caps, and the right hand spittoon - Installed in right side of printer
24-inch take-up reel spindle assembly
Spittoon assembly - Contains absorbers which hold excess ink from cartridges
Left spittoon assembly - Contains absorbers which hold excess ink from printheads
Left-side spittoon assembly - Holds expelled ink from cartridge during refresh cycle
Bail gear support 'claw' spring - Attached between the bail engaging lever support and the bail gear assembly
Starwheel mount assembly - Includes cover, body, spring and two starwheels
Encoder strip assembly (D-size) - Includes encoder strip and encoder strip spring
Belt Tensioner Assembly - Keeps carriage belt assembly tight on designJet plotters (see belt Q6659-60175 44-inch & Q5669-60673 24-inch).
Pinch insertion tool sv For Designjet printers
Media driver tool kit - Includes the handle for media driver tool support and the media driver ddjustment tool
Tool Kit - Includes the flex cleaner, screwdriver torx T-15, dispenser oil, insert spring tool, alignment manual pinch arm, and media driver tool - For use with the DesignJet Z and T printer series
Trim kit - Includes the front and back trims for the left and right sides - Installed between the main printer chassis and the left or right end covers