Air pressurization system (APS) - Includes pump, valve, pressure sensor, and APS housing
JetDirect 620n internal print server - 10BaseT and 100BaseTX LAN interface board - Plugs into peripheral EIO slot - Has an RJ-45 connector;Click to order the functional equivalent: J7934-69021
Belt tensioner kit - Keeps carriage belt tight - Includes pulley assembly, pulley spring, wedge, and actuator arm
Carriage belt - 60-inch - Attaches to the carriage 60 BELT SVCCarriage belt - 60-inch - Attaches to the carriage
IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin high density IEEE 1284C (M) connector (type C) - 10m (33ft) long
Trailing cable kit - Includes trailing cable trailing cable clip cover cap trailing ferrite and screws on OEM only. - For 60-inch version
Trailing cable kit - Includes trailing cable only; trailing cable clip cover cap trailing ferrite and screws provided on OEM only. - For 60-inch version
Printhead carriage assembly - Includes carriage, carriage height tool, cutter assembly, carriage position sensor and line sensor
Printhead carriage assembly - Includes carriage, carriage height tool, cutter assembly, carriage position sensor and line sensor RSTRD Q1251-60070.
Control panel assembly - Includes control panel Control panel assembly - Includes control panel cable (comes with 3 buttons).
Cutter assembly kit - Includes cutter, screw and washer
SATA SVC HDD RTL FW S.56.07 RC 160GB SATA HARD DRIVE. (For PATA version order Q1251-60323).
Hard drive - For the DesignJet 5500 PS - Includes firmware version S.56.05 PATA 40GB. (for SATA HD order Q1252-60054).
Hard drive - For the DesignJet 5500 PS - Includes firmware version S.56.04 (FOR S.56.07 PS FW order Q1252-69045 and for SATA order Q1252-60054).
Cooling Fan - Installed Under Power Supply (Two used) part number is for one pc.
Cooling fan for HP DesignJet 5500 Series Cooling Fan - Installed Under Power Supply (Two used) part number is for one pc.
Booster fan assembly
Vacuum fan assembly - Includes the fan and air flow guide assembly
PATA SVC HDD RTL FW S.56.07- RC Hard drive 320GB - For the DesignJet 5500 RTL - Includes firmware version S.56.07.(For SATA order Q1251-60146).
SVC HDD PS FW S.56.07 RC 160GB Hard Drive SATA. (for PATA HD order Q1252-60045).
SVC HDD PS - Includes firmware version S.56.07 HARD DRIVE ASSEMBLY w/Postscript. Hard drive - For the DesignJet 5500 PS PATA 320GB. (for SATA HD order Q1252-60054).
Heater assembly
Right take-up reel holder
Spindle hub (Blue) - Installed on the left end of the rollfeed spindle. For the Right side /black hub see (C6095-40092).
Spindle hub (Black) installed on the Right side of the rollfeed spindle. For the Left side /blue hub see (C6090-60105).
UV Ink Tubes Assembly - Includes six ink tubes complete with hardware assemblies at both ends (carriage crane and ink supply station crane), six setup pens, ink leak detector system components, carrier clip, ISS housing foam - 1.524m (60in), DYE INK ASSY order Q1253-60041.
DYE INK TUBES Includes 6 ink tubes complete with hardware assemblies at both ends (carriage crane and ink supply station crane),6 setup pens, ink leak detector system components, carrier clip, ISS housing foam - 60in (152.4cm. UV INK order Q1253-60042.
UV INK ASSY includes six ink tubes complete with hardware assemblies at both ends carriage crane and ink supply station crane, six setup pens, ink leak detector system components,carrier clip,ISS housing foam. 1.524m 60in. DYE INK ASSY order Q1253-60041.
128MB SDRAM DIMM memory module
DesignJet 5000 series OEM boot ROM DIMM PS 06.00.51
Paper-axis motor - Includes helical gear and grease - Motor that provides power to feed paper for printing process
Carriage (Scan-Axis) Motor Assembly - Includes Pulley and power cable
Carriage (scan-axis) motor assembly - Includes pulley and power cable
PCI to IDE PC board for hp designJet 5000/5500
Ink supply station (ISS) PC board - Includes cable
Ink Leak Detection Board HP DesignJet 5000 / 5500 Plotters series.
Main Logic PC board FOR HEWLETT PACKARD DESIGNJet PLOTTERS.
Main logic PC board - Includes IDS (ink delivery system) board cable
Ethernet 10Base-T (RJ-45) EIO network HP JETDIRECT 600N internal print server PC board
Ethernet 10Base-T/10Base2 and LocalTalk (RJ-45, BNC, LocalTalk) EIO network PCA
JetDirect 600N internal print server (10Base-T and 100Base-TX) LAN interface board - Plugs into peripheral EIO slot
HP JetDirect 500X external token ring print server module - Interfaces up to 3 parallel printers to an ethernet 10Base-T (RJ-45), 10Base2 (BNC), or 100Base-TX (RJ-45) LAN
JetDirect 610N internal print server (10Base-T and 100Base-TX) LAN interface board - Plugs into peripheral EIO slot - Has a RJ-45 connector - Comes with software on CD-ROM and manual
HP JetDirect 620n internal print server - 10BaseT and 100BaseTX LAN interface board - Plugs into peripheral EIO slot - Has an RJ-45 connector - Comes with software on CD-ROM and manual on CD-ROM
Center platen assembly
JetDirect 620N Ethernet Print Server, internal print server LAN interface board - 10Base-T and 100Base-TX - Plugs into peripheral EIO slot, has RJ-45 connector.
No. 81 black dye-based printhead and printhead cleaner bundle
No. 81 Magenta dye-based printhead and printhead cleaner bundle
No. 81 Yellow dye-based printhead and printhead cleaner bundle
Drop detector (sensor) assembly - Includes spittoon foam - Installed in service station assembly
Line sensor for Hewlett Packard DesignJet 5500/ 5500uv/5500PS / 5100 series Plotters plotters.
Service station assembly - Includes motors, spittoon foam, drop detector, and primer assembly
Carriage height tool